skip to Main Content
888-367-4583 (888 For Glue)

Multi-Plastic Pipe Glue


Buy Multi-Plastic Pipe Glue if you’re working with more than one type of plastic. It glues almost any combination of PVC, CPVC and ABS pipe. Don’t know what type of plastic you’re working on? Trying to join different types of pipe? Multi-Plastic Pipe Glue is the answer. It’s the only cement you’ll want, when you don’t know what you’ll need.

Multi-Plastic Pipe Glue is tougher than the pipe itself. It meets or exceeds ASTM D2535/2564 and F493 standards. It’s thoroughly tested for leakage under pressure.

Applications: Can be used on all types of PVC, CPVC and ABS piping systems, including conduit, DWV (drain, waste & vent), sewer, irrigation and plumbing systems. Can be used for potable water systems.

SPECIFICATIONS: Amber (dries clear), Medium Body cement for use on schedule 40 through 6” dia. pipe and schedule 80 through 4” dia. pipe. Extremely Flammable. Do not expose to flame. Flash point -4°F. Usable temperature range and storage: 40° to 110°F.May be thawed and used if frozen. Max VOC per SCAQMD 1168/316A 490 G/L. Shelf life up to 2 years unopened.

*WARNING: Keep out of the reach of children! Use in a well ventilated, flame free area.

*CAUTION: Do not inhale, drink or expose to skin or eyes. May cause irritation to eyes, nose, respiratory tract and skin. May cause coughing, sore throat, difficulty in breathing, headache, dizziness and nausea. Long term repeated exposure to solvents may cause damage to the brain, nervous system, reproductive system, respiratory mucous membranes, liver and kidneys.

*FIRST AID: IN CASE OF INHALATION: Transport to fresh air and keep at rest in a position that will aid in breathing. Immediately call a Poison Center or a physician.

*IN CASE OF INGESTION: Do not induce vomiting. Immediately call a Poison Center or a physician.

*IN CASE OF CONTACT WITH SKIN: Immediately flush with water for 15 minutes. Seek medical attention if irritation persists.

*IN CASE OF FIRE: Use dry, CO2 or chemical foam. *SPILLS: Remove all sources of ignition and ventilate the area. Wear appropriate protective equipment which may include respirators. If vapor levels are high (refer to SDS) to clean up spill. Use absorbents to collect spill and put it in a labeled sealed metal container. Dispose of in accordance with local, state and federal regulations.

*CONTAINS: Tetrahydrofuran (109-99-9) Methyl Ethyl Ketone (78-93-3) Cyclohexanone (108-94-1) Acetone (67-64-1) PVC Resin (68648-82-8).

The (SDS) Safety Data Sheet is available at


Back To Top